Who can log into your refrigeration system?

European refrigeration cyber incidents put remote access and alarm testing on the maintenance agenda for cold rooms and commercial refrigeration.

A cold-room temperature alarm can be the first sign that something has gone wrong. Most people immediately think of a failed sensor, a compressor fault or a door left open. A series of incidents across Europe has added another possibility to that list. Someone may have gained access to the controls.

On 4 November, the EU’s cybersecurity agency ENISA and other European authorities published a joint statement following a fresh wave of incidents on 1 and 2 November. Commercial refrigeration systems and similar devices in several EU member states had been affected since October. 

The questions we’d ask on a maintenance visit

Start with the people who actually use the system. Who can log in remotely? Is an old contractor’s account still active? Who receives the high-temperature alarm overnight, and when was that alarm last tested from the controller through to the person on call?

The refrigeration engineer can identify controllers and gateways, check their configuration with the site team and test whether alarms reach the right people. The IT team can review how remote access is secured and which devices can be reached from other parts of the network. Both teams need to know what happens to monitoring when the connection drops.

Remote access is valuable when a call comes in after hours. Knowing who has access, who can change a setpoint and who gets the alarm makes it more useful when something actually goes wrong.

Five checks you can do this week

You don’t need to be an IT specialist to tighten things up. Most of the risk comes from a handful of everyday gaps, and each one takes minutes to check.

Change any default passwords. Many controllers leave the factory with a standard login that is printed in the manual. If yours has never been changed, change it today.

List everyone who has remote access. Write down each person and company that can log in. Remove anyone who no longer works with you, including previous contractors.

Give each person their own login. Shared passwords make it impossible to tell who changed a setting, and they are rarely updated when someone leaves.

Ask how the system connects to the internet. A controller should sit behind a secure connection such as a VPN. It should never be reachable simply by typing an address into a browser.

Test that your alarms reach a real person. Trigger a test alarm and confirm the call, text or email arrives, including out of hours. An alarm nobody receives is the same as no alarm.

Keep a dated note of what you checked. If something does go wrong, that record helps your engineer, your insurer and your customers.

If you’d like these checks carried out as part of your next maintenance visit, our engineers can review access and alarm settings alongside the usual service. See our maintenance and service page or request a quote.

Scroll to Top